Keyence

Module chuyển động Keyence KV-MC40V 4 vị trí

Mã sản phẩm: kv-mc40v

13.720.000 ₫

Mã hàng: KV-MC40V
Thương hiệu: Keyence
Chất lượng: Mới 100%, chưa qua sử dụng
Bảo hành: theo nhà sản xuất 12 tháng
Chứng từ: hóa đơn VAT

Khối chuyển động định vị dãy xung 4 trục

Cần tư vấn sản phẩm?Liên hệ Lạc Việt để được tư vấn thông số và báo giá phù hợp.Gọi tư vấn: 0961295263

Hàng chính hãngMới 100%

Bảo hành12 tháng

Hóa đơn VATCó

Thông tin sản phẩm

Module chuyển động Keyence KV-MC40V 4 vị trí là sản phẩm thuộc nhóm PLC của thương hiệu Keyence.

Thiết bị điều khiển lập trình dùng để xử lý logic và điều khiển máy móc, dây chuyền trong công nghiệp. Hàng mới 100%, chưa qua sử dụng, bảo hành 12 tháng theo nhà sản xuất và kèm hóa đơn VAT. Thông số chi tiết được liệt kê trong bảng bên dưới.

Thông tin chung

Mã model	KV-MC40V
Mã model	Positioning/Motion unit

Thông số kỹ thuật

Number of control axes	4 axes + 1 axis (virtual axis)
Built-in device	Relay: 1280 points (80 ch), Data memory: 90 words (high speed) / 582 words (simple)
Output format	Differential line driver output (switchable among 1-pulse method, 2-pulse method, and A/B-phase method)
Connectable CPU units	KV-5500/5000/3000
Max. output pulse	4 MHz
Control mode	Position control
Control period	1.0 ms
External interface	Input: Photocoupler input, Output: Open collector output (30 VDC 50 mA)
Input time constant	Each input is set in 11 stages for each block
Axis control function execution method	Ladder program, motion flow
Motion flow	Program capacity: 768 KB, Max. number of blocks: 256 blocks, Max. number of flows: 32
Position unit	mm, deg (angle), PLS (pulse count), decimal point position from 0 to 9 digits, unit conversion function available
Cumulative address	-2,147,483,648 to +2,147,483,647 instruction units
Positioning mode	Absolute value/relative value
Position setting range	-2,147,483,648 to +2,147,483,647 instruction units
Interpolation	Straight-line interpolation (up to 16 axes), arc interpolation, helical interpolation
Acceleration/deceleration curve	Straight-line, SIN, Bezier
Acceleration/deceleration time	0 to 65,535 ms
Start-up time	Independent: 500 to 600 µs, Interpolation (straight-line 2 axes): 600 to 700 µs, Interpolation (arc 2 axes): 700 to 800 µs
M-code	1 to 65,000, WITH/AFTER mode
Sensor positioning	External input – based switching control from speed to position
Number of points	800 points/axis
Synchronisation control	Input: Counter (KV-MX1 required), instruction coordinates, current coordinates (KV-ML16V only)
Clutch	Select from direct, slide, and follow-up
Cam	Resolution: 2,048 to 32,768, Amount of data: 4 to 64 (Number changes according to the resolution)
Contact output	16 points (including 8 external output points) × 2
Correction during operation	Correction via auxiliary input, phase correction, and lead angle correction
Fine control	Fine data work area: 8 MB, Built-in ROM capacity: 512 KB, Number of settings: Built-in ROM: 100, SD memory card: 1000
Origin return	Origin sensor edge/midpoint, push origin return, Dog type (“With Z phase” or “Without Z phase” can be selected), data set type, no limit switch
Speed control	Speed instruction range: –
Torque control	Torque instruction range: –
JOG/inching	Inching (The number of pulses can be specified), JOG (high speed/low speed)
Teaching	Current coordinate teaching and teaching from the counter current value are supported
Memory data	Point parameters 800 points (each axis), synchronisation parameters (each axis), fine setting (built-in ROM: 512 KB, expandable with SD card), cam data motion flow setting, etc. can be read and written during RUN (with some restrictions)
High-speed counter	When KV-MX1 is connected: INC 4 ch/ABS Grey, residual Grey, binary 2 ch (switched, based on settings), Max. 6.4 MHz (2-phase, 4 multiplication)
5-V power output	5 V ±5%, Max. 100 mA (total value)
Output display	Error status/Pulse output status
Self-diagnosis function	Diagnosis can be made through hardware error, various parameter errors, error number, and error messages
Parameter setting	Parameters can be set from KV-HPD1, “KV STUDIO,” and ladder programs
Data backup	Coordinates and error/warning history backup, parameter settings backup via flash ROM, 100,000 times switching
Internal current consumption	Main unit: 180 mA or less, external I/O: 130 mA or less
Weight	Approx. 225 g

Lựa chọn PLC phù hợp với Module keyence

SKU	Mô tả
CPU
KV-X500	CPU unit
KV-8000	CPU unit
KV-7500	CPU unit with built-in EtherNet/IP® port
KV-7300	CPU unit with built-in serial port
KV-5500	CPU unit with built-in EtherNet/IP® port
KV-5000	CPU unit with built-in Ethernet port
KV-3000	CPU unit with built-in serial port
KV-1000	CPU unit with built-in serial port
KV-700	CPU unit with built-in serial port
I/O unit
KV-B16RA	16-point Screw Terminal Block, Relay Output
KV-B16RC	16-point Screw Terminal Block, Relay Output
KV-B16TA	16-point Screw Terminal Block, Transistor (Sink)
KV-B16TC	16-point Screw Terminal Block, Transistor (Sink)
KV-B16TCP	16-point Screw Terminal Block, Transistor (Source)
KV-B16TD	16-point Screw Terminal Block, MOSFET (Sink) with Overcurrent Protection
KV-B16XA	16-point Screw Terminal Block
KV-B16XC	16-point Screw Terminal Block
KV-B8RC	8-point Screw Terminal Block, Relay Output (Independent Common)
KV-B8XTD	8-point/8-point Screw Terminal Block, MOSFET (Sink), with Overcurrent Protection
KV-C16XTD	16-point/16-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C32TA	32-point Connector Transistor (Sink)
KV-C32TC	32-point Connector Transistor (Sink)
KV-C32TCP	32-point Connector Transistor (Source)
KV-C32TD	32-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C32XA	32-point Connector
KV-C32XC	32-point Connector
KV-C32XTD	32-point/32-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C64TA	64-point Connector Transistor (Sink)
KV-C64TC	64-point Connector Transistor (Sink)
KV-C64TCP	64-point Connector Transistor (Source)
KV-C64TD	64-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C64XA	64-point Connector
KV-C64XB	64-point Connector, with All Terminals Supporting 2-wire Sensors
KV-C64XC	64-point Connector
KV-SIR32XT	High speed I/O unit
I/O unit/Remote I/O unit
KV-N16ER	Expansion output unit, output 16 points, relay output, screw terminal block
KV-N16ET	Expansion output unit 16 Outputs Transistor (Sink) Output Screw Terminal Block,
KV-N16ETP	Expansion output unit 16-output Transistor (source) output Screw terminal block
KV-N16EX	Expansion unit, Input, 16 points, 5/24 VDC switchable, screw terminal block
KV-N8ER	Expansion output unit, output 8 points, relay output, screw terminal block
KV-N8ET	Expansion output unit 8 Outputs Transistor (Sink) Output Screw Terminal Block,
KV-N8ETP	Expansion output unit 8-output Transistor (source) output Screw terminal block
KV-N8EX	Expansion Input Unit DC Input 8 Points Type Screw Terminal Block
KV-N8EXR	Expansion I/O Unit 16 Points Type Screw Terminal Block, Input(8 Points) relay output(8 Points)
KV-N8EXT	Expansion I/O Unit Screw Terminal Block, Screw Terminal Block, Input(8 Points) Transistor (sink)(8 Points)
KV-NC16ET	Expansion Output Unit 16-output Transistor (Sink) connector type
KV-NC16ETE	Expansion output unit 16 outputs transistor (sink) output European terminal block
KV-NC16ETP	Expansion output unit 16-output Transistor (source) output Connector type
KV-NC16ETPE	Expansion output unit 16 outputs transistor (source) output European terminal block
KV-NC16EX	Expansion Input Unit 16-input switching 5V/24V DC connector type
KV-NC16EXE	Expansion input unit input 16 points European terminal block
KV-NC16EXT	Expansion I/O unit 32-point connector type 16-input, 16-output (transistor)
KV-NC32ET	Expansion Output Unit 32-output Transistor (Sink) connector type
KV-NC32ETP	Expansion output unit 32-output Transistor (source) output Connector type
KV-NC32EX	Expansion Input Unit 32-input switching 5V/24V DC connector type
KV-NC32EXT	Expansion I/O unit 32-input 32-output Transistor (sink) output Connector type
KV-NC8ER	Expansion Output Unit 8-output Relay connector type
Analog/Temperature unit
KV-AD40	A/D Conversion Unit, 4 Analog Input Channels
KV-AD40G	High-precision A/D Conversion Unit, 4 Analog Input Channels
KV-AD40V	A/D Conversion Unit, 4 Analog Input Channels
KV-AM40V	A/D D/A Conversion Unit, 2 Analog Input Channels + 2 Analog Output Channels
KV-DA40	D/A Conversion Unit, 4 Analog Output Channels
KV-DA40V	D/A Conversion Unit, 4 Analog Output Channels
KV-SAD04	High-speed analogue input unit
KV-SDA04	High-speed analogue output unit
KV-TF40	PID Temperature Adjustment Unit (Multi-input 4-channel)
KV-TP40	Temperature Analog Multi-input Unit (Multi-input 4-channel)
Analog/Temperature unit/Remote I/O unit
KV-N3AM	Analog I/O Unit, voltage and current Input 2ch, voltage and current Output 1ch
KV-NC2DA	D/A conversion unit (2 points)
KV-NC4AD	A/D Conversion Unit 4-point type
KV-NC4TP	Temperature 4-input unit
Remote I/O unit
KL-16BR	16-point Screw Terminal Block, Relay Output
KL-16BT	16-point Screw Terminal Block, Transistor (Sink)
KL-16BX	16-point Screw Terminal Block
KL-16CT	16-point Connector Transistor (Sink)
KL-16CX	16-point Connector
KL-2DA	D/A Conversion Unit, 2 Analog Output Channels
KL-2TF	PID Temperature Adjustment Unit (2-channel)
KL-32CT	32-point Connector Transistor (Sink)
KL-32CX	32-point Connector
KL-4AD	A/D Conversion Unit, 4 Analog Input Channels
KL-8BLR	8-point Screw Terminal Block, Relay Output with Repeater Function
KL-8BLT	8-point Screw Terminal Block, Transistor (Sink) Output, with Repeater Function
KL-8BLX	8-point Screw Terminal Block with Repeater Function
KL-8BXR	8 Input + 8 Relay Output Screw Terminal Block
KL-8BXT	8 Input + 8 Transistor (Sink) Output Screw Terminal Block
KL-B1	Joint Cable Adapter
KL-DC1A	DC Current Input Unit
KL-DC1V	DC Voltage Input Unit
KL-LC1	Load Cell Measurement Unit
KL-N20V	KL Master Unit
KL-T1	T-shaped Branch Unit
KL-WH1	Power Measurement Unit
KV-EP02	EtherNet/IP® Compatible Communication Unit
KV-RC16BR	16-point Screw Terminal Block, Relay Output, with Repeater Function
KV-RC16BT	16-point Screw Terminal Block, Transistor Output, with Repeater Function
KV-RC16BX	16-point Screw Terminal Block Input, with Repeater Function
KV-RC16BXT	16-input + 16-output Screw Terminal Block, Transistor Output
KV-RC32BT	32-point Screw Terminal Block, Transistor Output
KV-RC32BX	32-point Screw Terminal Block Input
KV-RC8BXR	8-input + 8-output Screw Terminal Block, Relay Output, with Repeater Function
KV-RC8BXT	8-input + 8-output Screw Terminal Block, Transistor Output, with Repeater Function
Positioning/Motion unit
KV-H20G	2-axis Pulse Train (Linear and Circular Interpolation and Synchronous Operation Possible) with Built-in 2-channel High-speed Counter
KV-H20S	2-axis Pulse Train (Linear Interpolation Possible)
KV-H40S	4-axis Pulse Train (Linear Interpolation Possible)
KV-MC20V	2-axis Pulse Train Positioning Motion Unit
KV-MC40V	4-axis Pulse Train Positioning Motion Unit
KV-ML16V	16-axis ML 2-compatible Positioning Motion Unit
KV-MX1	INC Encoder, 4 Input Channels, 12 Inputs, 12 Outputs, SD Card
KV-SH04PL	High-Speed Positioning Unit
KV-XH04ML	4-Axis Positioning/Motion Unit
KV-XH16ML	16-Axis Positioning/Motion Unit
Highspeed counter unit
KV-SC20V	2-channel Multi-function High-speed Counter Unit
KV-SSC02	High speed counter unit
Information/Network unit
KV-CL20	Master/Local Unit
KV-DN20	DeviceNet® Unit
KV-EP21V	EtherNet/IP® Unit
KV-FL20V	FL-net Unit
KV-L20V	Serial Communication Unit
KV-L21V	Serial Communication Unit
KV-LE20V	Ethernet Unit
KV-LE21V	Ethernet Unit
KV-LH20V	Communication Positioning Unit
KV-LM20V	High-speed Multi-link (Megalink) Unit
KV-LM21V	High-speed multi-link Unit
KV-XL202	Serial communication unit, 2 ports (RS-232C×2)
KV-XL402	Serial communication unit, 2 ports (RS-422A/485×2)
KV-XLE02	EtherNet unit, 2 ports
Power/Bus connection unit
KV-7000C	Bus Connection Unit
KV-EB1	Extension Unit
KV-N1	Conversion unit with connector unit
KV-NC1	Conversion unit with terminal block connector
KV-PU1	AC Power Supply Unit with Error Output