Keyence

Module truyền động Keyence KV-ML16V 16 vị trí

Mã sản phẩm: kv-ml16v

6.860.000 ₫

Mã hàng: KV-ML16V
Thương hiệu: Keyence
Chất lượng: Mới 100%, chưa qua sử dụng
Bảo hành: theo nhà sản xuất 12 tháng
Chứng từ: hóa đơn VAT

Khối chuyển động định vị tương thích ML 2 16 trục

Cần tư vấn sản phẩm?Liên hệ Lạc Việt để được tư vấn thông số và báo giá phù hợp.Gọi tư vấn: 0961295263

Hàng chính hãngMới 100%

Bảo hành12 tháng

Hóa đơn VATCó

Thông tin sản phẩm

Module truyền động Keyence KV-ML16V 16 vị trí là thiết bị PLC mang thương hiệu Keyence. Về cấu hình, thiết bị có motion flow – program capacity 768 KB, positioning control – mode Absolute value/relative value và positioning control – m-code 1 to 65,000, WITH/AFTER mode.

Thiết bị điều khiển lập trình dùng để xử lý logic và điều khiển máy móc, dây chuyền trong công nghiệp. Hàng mới 100%, chưa qua sử dụng, bảo hành 12 tháng theo nhà sản xuất và kèm hóa đơn VAT. Bạn có thể xem đầy đủ thông số ở bảng kỹ thuật bên dưới.

Thông tin chung

Mã model	KV-ML16V
Mã model	Positioning/Motion unit

Thông số kỹ thuật

Number of control axes	16 axes (total including a virtual axis)
Built-in device	[16 axes in use]Relay: 2,688 points (168 ch), Data memory: 222 words (high speed) /1,242 words (simple) [8 axes in use]Relay: 1,644 points (104 ch), Data memory: 222 words (high speed) /762 words (simple) [4 axes in use]Relay: 1,152 points (72 ch), Data memory: 222 words (high speed) /522 words (simple)
Output format	MECHATROLINK-II
Connectable CPU units	KV-5500/5000/3000
Max. output pulse	–
Control mode	Position control, Torque control, Speed control, ML-II command, I/O control
Control period	0.5 ms (up to 2 axes), 1.0 ms (up to 4 axes), 1.5 ms (up to 6 axes), 2.0 ms (up to 8 axes), 2.5 ms (up to 12 axes), 3.0 ms (up to 16 axes)
External interface	Input: Photocoupler input, Output: Open collector output (30 VDC 50 mA) MECHATROLINK-II port
Input time constant	Each input is set in 11 stages for each block
Axis control function execution method	Ladder program, motion flow
Motion flow – program capacity	768 KB
Motion flow – max. number of blocks	A total of 256 blocks in all flows
Motion flow – max. number of flows	32
Motion flow – number of simultaneous activities	Number of connectable axes × 2
Position unit	mm, deg (angle), PLS (pulse count), decimal point position from 0 to 9 digits, unit conversion function available
Cumulative address	-2,147,483,648 to +2,147,483,647 instruction units
Positioning control – mode	Absolute value/relative value
Positioning control – position setting range	-2,147,483,648 to +2,147,483,647 instruction units
Positioning control – interpolation	Straight-line interpolation (up to 16 axes), arc interpolation, helical interpolation
Positioning control – single operation address	-2,147,483,648 to +2,147,483,647 instruction units
Positioning control – acceleration/deceleration curve	Straight-line, SIN, Bezier
Positioning control – acceleration/deceleration time	0 to 65,535 ms
Positioning control – start-up time	Independent/interpolation: 2 to 3 control periods (When the 1st axis is activated) Cache start: 1 to 2 control periods
Positioning control – m-code	1 to 65,000, WITH/AFTER mode
Positioning control – sensor positioning	External input – based switching control from speed to position
Positioning control – number of points	800 points/axis
Synchronisation control – input	Counter (KV-MX1 required), instruction coordinates, current coordinates (KV-ML16V only)
Synchronisation control – clutch	Select from direct, slide, and follow-up
Synchronisation control – cam	Resolution: 2,048 to 32,768, Amount of data: 4 to 64 (Number changes according to the resolution)
Synchronisation control – contact output	16 points (including 8 external output points) × 2
Synchronisation control – correction during operation	Correction via auxiliary input, phase correction, and lead angle correction
Fine control – fine data work area	8 MB
Fine control – built-in ROM capacity	512 KB
Fine control – number of settings	Built-in ROM: 100, SD memory card: 1000
Fine control – data capacity of one setting	Built-in ROM: 512 KB, SD memory card: 8 MB (KV-MX1 is required)
Origin return	Origin sensor edge/midpoint, push origin return, Dog type (“With Z phase” or “Without Z phase” can be selected)
Speed control	Speed instruction range: -100,000 to 100,000 (× 0.01 min-1)
Torque control	Torque instruction range: -80,000 to 80,000 (× 0.01 %)
JOG/inching	Inching (The number of pulses can be specified), JOG (high speed/low speed)
Teaching	Current coordinate teaching and teaching from the counter current value are supported
Memory data	Point parameters 800 points (each axis), synchronisation parameters (each axis), fine setting (built-in ROM: 512 KB, expandable with SD card), cam data motion flow setting, etc. can be read and written during RUN (with some restrictions)
High-speed counter	When KV-MX1 is connected: INC 4 ch/ABS Grey, residual Grey, binary 2 ch (switched, based on settings), Max. 6.4 MHz (2-phase, 4 multiplication)
5-V power output	–
Output display	Error status/MECHATROLINK-II communication status
Self-diagnosis function	Diagnosis can be made through hardware error, various parameter errors, error number, and error messages
Parameter setting	Parameters can be set from KV-HPD1, “KV STUDIO,” and ladder programs
Data backup	Coordinates and error/warning history backup, parameter settings backup via flash ROM, 100,000 times switching
Internal current consumption	Main unit: 200 mA or less, external I/O: 120 mA or less
Weight	Approx. 220 g

Lựa chọn PLC phù hợp với Module keyence

SKU	Mô tả
CPU
KV-X500	CPU unit
KV-8000	CPU unit
KV-7500	CPU unit with built-in EtherNet/IP® port
KV-7300	CPU unit with built-in serial port
KV-5500	CPU unit with built-in EtherNet/IP® port
KV-5000	CPU unit with built-in Ethernet port
KV-3000	CPU unit with built-in serial port
KV-1000	CPU unit with built-in serial port
KV-700	CPU unit with built-in serial port
I/O unit
KV-B16RA	16-point Screw Terminal Block, Relay Output
KV-B16RC	16-point Screw Terminal Block, Relay Output
KV-B16TA	16-point Screw Terminal Block, Transistor (Sink)
KV-B16TC	16-point Screw Terminal Block, Transistor (Sink)
KV-B16TCP	16-point Screw Terminal Block, Transistor (Source)
KV-B16TD	16-point Screw Terminal Block, MOSFET (Sink) with Overcurrent Protection
KV-B16XA	16-point Screw Terminal Block
KV-B16XC	16-point Screw Terminal Block
KV-B8RC	8-point Screw Terminal Block, Relay Output (Independent Common)
KV-B8XTD	8-point/8-point Screw Terminal Block, MOSFET (Sink), with Overcurrent Protection
KV-C16XTD	16-point/16-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C32TA	32-point Connector Transistor (Sink)
KV-C32TC	32-point Connector Transistor (Sink)
KV-C32TCP	32-point Connector Transistor (Source)
KV-C32TD	32-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C32XA	32-point Connector
KV-C32XC	32-point Connector
KV-C32XTD	32-point/32-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C64TA	64-point Connector Transistor (Sink)
KV-C64TC	64-point Connector Transistor (Sink)
KV-C64TCP	64-point Connector Transistor (Source)
KV-C64TD	64-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C64XA	64-point Connector
KV-C64XB	64-point Connector, with All Terminals Supporting 2-wire Sensors
KV-C64XC	64-point Connector
KV-SIR32XT	High speed I/O unit
I/O unit/Remote I/O unit
KV-N16ER	Expansion output unit, output 16 points, relay output, screw terminal block
KV-N16ET	Expansion output unit 16 Outputs Transistor (Sink) Output Screw Terminal Block,
KV-N16ETP	Expansion output unit 16-output Transistor (source) output Screw terminal block
KV-N16EX	Expansion unit, Input, 16 points, 5/24 VDC switchable, screw terminal block
KV-N8ER	Expansion output unit, output 8 points, relay output, screw terminal block
KV-N8ET	Expansion output unit 8 Outputs Transistor (Sink) Output Screw Terminal Block,
KV-N8ETP	Expansion output unit 8-output Transistor (source) output Screw terminal block
KV-N8EX	Expansion Input Unit DC Input 8 Points Type Screw Terminal Block
KV-N8EXR	Expansion I/O Unit 16 Points Type Screw Terminal Block, Input(8 Points) relay output(8 Points)
KV-N8EXT	Expansion I/O Unit Screw Terminal Block, Screw Terminal Block, Input(8 Points) Transistor (sink)(8 Points)
KV-NC16ET	Expansion Output Unit 16-output Transistor (Sink) connector type
KV-NC16ETE	Expansion output unit 16 outputs transistor (sink) output European terminal block
KV-NC16ETP	Expansion output unit 16-output Transistor (source) output Connector type
KV-NC16ETPE	Expansion output unit 16 outputs transistor (source) output European terminal block
KV-NC16EX	Expansion Input Unit 16-input switching 5V/24V DC connector type
KV-NC16EXE	Expansion input unit input 16 points European terminal block
KV-NC16EXT	Expansion I/O unit 32-point connector type 16-input, 16-output (transistor)
KV-NC32ET	Expansion Output Unit 32-output Transistor (Sink) connector type
KV-NC32ETP	Expansion output unit 32-output Transistor (source) output Connector type
KV-NC32EX	Expansion Input Unit 32-input switching 5V/24V DC connector type
KV-NC32EXT	Expansion I/O unit 32-input 32-output Transistor (sink) output Connector type
KV-NC8ER	Expansion Output Unit 8-output Relay connector type
Analog/Temperature unit
KV-AD40	A/D Conversion Unit, 4 Analog Input Channels
KV-AD40G	High-precision A/D Conversion Unit, 4 Analog Input Channels
KV-AD40V	A/D Conversion Unit, 4 Analog Input Channels
KV-AM40V	A/D D/A Conversion Unit, 2 Analog Input Channels + 2 Analog Output Channels
KV-DA40	D/A Conversion Unit, 4 Analog Output Channels
KV-DA40V	D/A Conversion Unit, 4 Analog Output Channels
KV-SAD04	High-speed analogue input unit
KV-SDA04	High-speed analogue output unit
KV-TF40	PID Temperature Adjustment Unit (Multi-input 4-channel)
KV-TP40	Temperature Analog Multi-input Unit (Multi-input 4-channel)
Analog/Temperature unit/Remote I/O unit
KV-N3AM	Analog I/O Unit, voltage and current Input 2ch, voltage and current Output 1ch
KV-NC2DA	D/A conversion unit (2 points)
KV-NC4AD	A/D Conversion Unit 4-point type
KV-NC4TP	Temperature 4-input unit
Remote I/O unit
KL-16BR	16-point Screw Terminal Block, Relay Output
KL-16BT	16-point Screw Terminal Block, Transistor (Sink)
KL-16BX	16-point Screw Terminal Block
KL-16CT	16-point Connector Transistor (Sink)
KL-16CX	16-point Connector
KL-2DA	D/A Conversion Unit, 2 Analog Output Channels
KL-2TF	PID Temperature Adjustment Unit (2-channel)
KL-32CT	32-point Connector Transistor (Sink)
KL-32CX	32-point Connector
KL-4AD	A/D Conversion Unit, 4 Analog Input Channels
KL-8BLR	8-point Screw Terminal Block, Relay Output with Repeater Function
KL-8BLT	8-point Screw Terminal Block, Transistor (Sink) Output, with Repeater Function
KL-8BLX	8-point Screw Terminal Block with Repeater Function
KL-8BXR	8 Input + 8 Relay Output Screw Terminal Block
KL-8BXT	8 Input + 8 Transistor (Sink) Output Screw Terminal Block
KL-B1	Joint Cable Adapter
KL-DC1A	DC Current Input Unit
KL-DC1V	DC Voltage Input Unit
KL-LC1	Load Cell Measurement Unit
KL-N20V	KL Master Unit
KL-T1	T-shaped Branch Unit
KL-WH1	Power Measurement Unit
KV-EP02	EtherNet/IP® Compatible Communication Unit
KV-RC16BR	16-point Screw Terminal Block, Relay Output, with Repeater Function
KV-RC16BT	16-point Screw Terminal Block, Transistor Output, with Repeater Function
KV-RC16BX	16-point Screw Terminal Block Input, with Repeater Function
KV-RC16BXT	16-input + 16-output Screw Terminal Block, Transistor Output
KV-RC32BT	32-point Screw Terminal Block, Transistor Output
KV-RC32BX	32-point Screw Terminal Block Input
KV-RC8BXR	8-input + 8-output Screw Terminal Block, Relay Output, with Repeater Function
KV-RC8BXT	8-input + 8-output Screw Terminal Block, Transistor Output, with Repeater Function
Positioning/Motion unit
KV-H20G	2-axis Pulse Train (Linear and Circular Interpolation and Synchronous Operation Possible) with Built-in 2-channel High-speed Counter
KV-H20S	2-axis Pulse Train (Linear Interpolation Possible)
KV-H40S	4-axis Pulse Train (Linear Interpolation Possible)
KV-MC20V	2-axis Pulse Train Positioning Motion Unit
KV-MC40V	4-axis Pulse Train Positioning Motion Unit
KV-ML16V	16-axis ML 2-compatible Positioning Motion Unit
KV-MX1	INC Encoder, 4 Input Channels, 12 Inputs, 12 Outputs, SD Card
KV-SH04PL	High-Speed Positioning Unit
KV-XH04ML	4-Axis Positioning/Motion Unit
KV-XH16ML	16-Axis Positioning/Motion Unit
Highspeed counter unit
KV-SC20V	2-channel Multi-function High-speed Counter Unit
KV-SSC02	High speed counter unit
Information/Network unit
KV-CL20	Master/Local Unit
KV-DN20	DeviceNet® Unit
KV-EP21V	EtherNet/IP® Unit
KV-FL20V	FL-net Unit
KV-L20V	Serial Communication Unit
KV-L21V	Serial Communication Unit
KV-LE20V	Ethernet Unit
KV-LE21V	Ethernet Unit
KV-LH20V	Communication Positioning Unit
KV-LM20V	High-speed Multi-link (Megalink) Unit
KV-LM21V	High-speed multi-link Unit
KV-XL202	Serial communication unit, 2 ports (RS-232C×2)
KV-XL402	Serial communication unit, 2 ports (RS-422A/485×2)
KV-XLE02	EtherNet unit, 2 ports
Power/Bus connection unit
KV-7000C	Bus Connection Unit
KV-EB1	Extension Unit
KV-N1	Conversion unit with connector unit
KV-NC1	Conversion unit with terminal block connector
KV-PU1	AC Power Supply Unit with Error Output