Keyence
PLC Keyence KV-3000
Mã sản phẩm: kv-3000
6.370.000 ₫
- Mã hàng: KV-3000
- Thương hiệu: Keyence
- Chất lượng: Mới 100%, chưa qua sử dụng
- Bảo hành: theo nhà sản xuất 12 tháng
- Chứng từ: hóa đơn VAT
- Khối CPU: sẵn có 24 điểm vào/ra
Cần tư vấn sản phẩm?Liên hệ Lạc Việt để được tư vấn thông số và báo giá phù hợp.Gọi tư vấn: 0961295263
Hàng chính hãngMới 100%
Bảo hành12 tháng
Hóa đơn VATCó
Thông tin sản phẩm
PLC Keyence KV-3000 là sản phẩm thuộc nhóm PLC của thương hiệu Keyence.
Thiết bị điều khiển lập trình dùng để xử lý logic và điều khiển máy móc, dây chuyền trong công nghiệp. Hàng mới 100%, chưa qua sử dụng, bảo hành 12 tháng theo nhà sản xuất và kèm hóa đơn VAT. Thông số chi tiết được liệt kê trong bảng bên dưới.
Thông tin chung
| Mã model | KV-3000 |
|---|---|
| Mã model | CPU Unit |
Thông số kỹ thuật
| Power Supply Voltage | 24 VDC (±10%) |
|---|---|
| Operating Ambient Temperature | 0 to 50 °C (no freezing)*1*2 |
| Relative Humidity | 10 to 95 % RH (no condensation)*1 |
| Altitude | -20 to +70 °C*1 |
| Operating Environment | Best in environments with minimal dust and corrosive gases |
| Maximum Altitude | 2000 m |
| Noise Immunity | Vp-p 1,500 or more, pulse width 1 µs, 50 ns (based on noise simulation), Complies with IEC standards (IEC61000-4-2/3/4/6) |
| Withstand Voltage | 1,500 VAC for 1 minute between power terminals and I/O terminals or terminals and auxiliary cover |
| Insulation Resistance | Above 50 MΩ (measured between power terminals and I/O terminals or external terminals and cover with a 500 V DC megohmmeter) |
| Overvoltage Category | II (When using KV-U7) |
| Pollution Degree | 2 |
| Intermittent Vibration | Frequency 5 to 9 Hz: Half amplitude 3.5 mm*3 Frequency 9 to 150 Hz: Acceleration 9.8 m/s2*3 |
| Continuous Vibration | Frequency 5 to 9 Hz: Half amplitude 1.75 mm*3 Frequency 9 to 150 Hz: Acceleration 4.9 m/s2*3 |
| Control Mode | Stored Program Mode |
| I/O Control Mode | Refresh Mode |
| Programming Language | Extended Ladder Diagram, KV Instructions, Easy-to-remember Symbols |
| Number of Instructions | Basic Instructions: 81 classes, 171 instructions Application Instructions: 43 classes, 60 instructions Mathematical Operation Instructions: 115 classes, 293 instructions Extension Instructions: 96 classes, 142 instructions Total: 335 classes, 666 instructions |
| Instruction Execution Speed | Basic Instructions: Minimum 10 ns Application Instructions: Minimum 20 ns |
| Program Capacity | Approximately 160 k steps |
| Maximum Number of Mountable Units | 16 units (48 units when connecting expansion units) |
| Maximum Number of I/O Points | Up to 3,096 points with expansion (KV-EB1S/KV-EB1R: when expanding 2 units, using 64-point I/O units) |
| Input Relay R | Total 16,000 points (1 bit) |
| Output Relay R | Total 16,000 points (1 bit) |
| Internal Relay R | Total 16,000 points (1 bit) |
| Link Relay B | Total 16,384 points (1 bit) |
| Internal Relay MR | Total 16,000 points (1 bit) |
| Latch Relay LR | Total 16,000 points (1 bit) |
| Control Relay CR | 640 points (1 bit) |
| Timer T | 4,000 points (32 bit) |
| Counter C | 4,000 points (32 bit) |
| Data Memory DM | 65,535 points (16 bit) |
| Extended Data Memory EM | 65,535 points (16 bit) |
| File Register | Bank Memory FM: 32,768 points × 4 banks (16 bit) ZF Mode: 131,072 points (16 bit) |
| Link Register W | Total 16,384 points (16 bit) |
| Temporary Memory TM | 512 points (16 bit) |
| High-Speed Counter CTH | 2 points (32 bit) |
| High-Speed Counter Comparator CTC | 4 points (32 bit, adopts 2 high-speed counters) |
| Index Register Z | 12 points (32 bit) |
| Control Memory CM | 6,000 points (16 bit) |
| Output Pulse Positioning | 2 points (maximum output frequency 100 kHz) |
| CPU Unit I/O | Input: 16 points, Output: 8 points |
| Program Memory | Flash memory, writable up to 100,000 times |
| Devices | 5-year battery backup (at 25 °C ambient temperature, in power failure retention mode)*4 |
| Self-Diagnostic Function | CPU abnormality, RAM abnormality, others |
| Internal Current Consumption | CPU Unit: 320 mA or less Expansion Unit: KV-EB1S 15 mA or less, KV-EB1R 25 mA or less (excluding drive current for input circuits) |
| Weight | CPU Unit: Approximately 300 g Terminal Block: Approximately 30 g Starter Block for KV-5500/5000/3000: Approximately 20 g Expansion Unit: KV-EB1S Approximately 90 g, KV-EB1R Approximately 115 g |
Thông tin bổ sung
Catalog-plc-keyence-kv-5000
Lựa chọn PLC phù hợp với Module keyence
| SKU | Mô tả |
| CPU | |
| KV-X500 | CPU unit |
| KV-8000 | CPU unit |
| KV-7500 | CPU unit with built-in EtherNet/IP® port |
| KV-7300 | CPU unit with built-in serial port |
| KV-5500 | CPU unit with built-in EtherNet/IP® port |
| KV-5000 | CPU unit with built-in Ethernet port |
| KV-3000 | CPU unit with built-in serial port |
| KV-1000 | CPU unit with built-in serial port |
| KV-700 | CPU unit with built-in serial port |
| I/O unit | |
| KV-B16RA | 16-point Screw Terminal Block, Relay Output |
| KV-B16RC | 16-point Screw Terminal Block, Relay Output |
| KV-B16TA | 16-point Screw Terminal Block, Transistor (Sink) |
| KV-B16TC | 16-point Screw Terminal Block, Transistor (Sink) |
| KV-B16TCP | 16-point Screw Terminal Block, Transistor (Source) |
| KV-B16TD | 16-point Screw Terminal Block, MOSFET (Sink) with Overcurrent Protection |
| KV-B16XA | 16-point Screw Terminal Block |
| KV-B16XC | 16-point Screw Terminal Block |
| KV-B8RC | 8-point Screw Terminal Block, Relay Output (Independent Common) |
| KV-B8XTD | 8-point/8-point Screw Terminal Block, MOSFET (Sink), with Overcurrent Protection |
| KV-C16XTD | 16-point/16-point Connector MOSFET (Sink) with Overcurrent Protection |
| KV-C32TA | 32-point Connector Transistor (Sink) |
| KV-C32TC | 32-point Connector Transistor (Sink) |
| KV-C32TCP | 32-point Connector Transistor (Source) |
| KV-C32TD | 32-point Connector MOSFET (Sink) with Overcurrent Protection |
| KV-C32XA | 32-point Connector |
| KV-C32XC | 32-point Connector |
| KV-C32XTD | 32-point/32-point Connector MOSFET (Sink) with Overcurrent Protection |
| KV-C64TA | 64-point Connector Transistor (Sink) |
| KV-C64TC | 64-point Connector Transistor (Sink) |
| KV-C64TCP | 64-point Connector Transistor (Source) |
| KV-C64TD | 64-point Connector MOSFET (Sink) with Overcurrent Protection |
| KV-C64XA | 64-point Connector |
| KV-C64XB | 64-point Connector, with All Terminals Supporting 2-wire Sensors |
| KV-C64XC | 64-point Connector |
| KV-SIR32XT | High speed I/O unit |
| I/O unit/Remote I/O unit | |
| KV-N16ER | Expansion output unit, output 16 points, relay output, screw terminal block |
| KV-N16ET | Expansion output unit 16 Outputs Transistor (Sink) Output Screw Terminal Block, |
| KV-N16ETP | Expansion output unit 16-output Transistor (source) output Screw terminal block |
| KV-N16EX | Expansion unit, Input, 16 points, 5/24 VDC switchable, screw terminal block |
| KV-N8ER | Expansion output unit, output 8 points, relay output, screw terminal block |
| KV-N8ET | Expansion output unit 8 Outputs Transistor (Sink) Output Screw Terminal Block, |
| KV-N8ETP | Expansion output unit 8-output Transistor (source) output Screw terminal block |
| KV-N8EX | Expansion Input Unit DC Input 8 Points Type Screw Terminal Block |
| KV-N8EXR | Expansion I/O Unit 16 Points Type Screw Terminal Block, Input(8 Points) relay output(8 Points) |
| KV-N8EXT | Expansion I/O Unit Screw Terminal Block, Screw Terminal Block, Input(8 Points) Transistor (sink)(8 Points) |
| KV-NC16ET | Expansion Output Unit 16-output Transistor (Sink) connector type |
| KV-NC16ETE | Expansion output unit 16 outputs transistor (sink) output European terminal block |
| KV-NC16ETP | Expansion output unit 16-output Transistor (source) output Connector type |
| KV-NC16ETPE | Expansion output unit 16 outputs transistor (source) output European terminal block |
| KV-NC16EX | Expansion Input Unit 16-input switching 5V/24V DC connector type |
| KV-NC16EXE | Expansion input unit input 16 points European terminal block |
| KV-NC16EXT | Expansion I/O unit 32-point connector type 16-input, 16-output (transistor) |
| KV-NC32ET | Expansion Output Unit 32-output Transistor (Sink) connector type |
| KV-NC32ETP | Expansion output unit 32-output Transistor (source) output Connector type |
| KV-NC32EX | Expansion Input Unit 32-input switching 5V/24V DC connector type |
| KV-NC32EXT | Expansion I/O unit 32-input 32-output Transistor (sink) output Connector type |
| KV-NC8ER | Expansion Output Unit 8-output Relay connector type |
| Analog/Temperature unit | |
| KV-AD40 | A/D Conversion Unit, 4 Analog Input Channels |
| KV-AD40G | High-precision A/D Conversion Unit, 4 Analog Input Channels |
| KV-AD40V | A/D Conversion Unit, 4 Analog Input Channels |
| KV-AM40V | A/D D/A Conversion Unit, 2 Analog Input Channels + 2 Analog Output Channels |
| KV-DA40 | D/A Conversion Unit, 4 Analog Output Channels |
| KV-DA40V | D/A Conversion Unit, 4 Analog Output Channels |
| KV-SAD04 | High-speed analogue input unit |
| KV-SDA04 | High-speed analogue output unit |
| KV-TF40 | PID Temperature Adjustment Unit (Multi-input 4-channel) |
| KV-TP40 | Temperature Analog Multi-input Unit (Multi-input 4-channel) |
| Analog/Temperature unit/Remote I/O unit | |
| KV-N3AM | Analog I/O Unit, voltage and current Input 2ch, voltage and current Output 1ch |
| KV-NC2DA | D/A conversion unit (2 points) |
| KV-NC4AD | A/D Conversion Unit 4-point type |
| KV-NC4TP | Temperature 4-input unit |
| Remote I/O unit | |
| KL-16BR | 16-point Screw Terminal Block, Relay Output |
| KL-16BT | 16-point Screw Terminal Block, Transistor (Sink) |
| KL-16BX | 16-point Screw Terminal Block |
| KL-16CT | 16-point Connector Transistor (Sink) |
| KL-16CX | 16-point Connector |
| KL-2DA | D/A Conversion Unit, 2 Analog Output Channels |
| KL-2TF | PID Temperature Adjustment Unit (2-channel) |
| KL-32CT | 32-point Connector Transistor (Sink) |
| KL-32CX | 32-point Connector |
| KL-4AD | A/D Conversion Unit, 4 Analog Input Channels |
| KL-8BLR | 8-point Screw Terminal Block, Relay Output with Repeater Function |
| KL-8BLT | 8-point Screw Terminal Block, Transistor (Sink) Output, with Repeater Function |
| KL-8BLX | 8-point Screw Terminal Block with Repeater Function |
| KL-8BXR | 8 Input + 8 Relay Output Screw Terminal Block |
| KL-8BXT | 8 Input + 8 Transistor (Sink) Output Screw Terminal Block |
| KL-B1 | Joint Cable Adapter |
| KL-DC1A | DC Current Input Unit |
| KL-DC1V | DC Voltage Input Unit |
| KL-LC1 | Load Cell Measurement Unit |
| KL-N20V | KL Master Unit |
| KL-T1 | T-shaped Branch Unit |
| KL-WH1 | Power Measurement Unit |
| KV-EP02 | EtherNet/IP® Compatible Communication Unit |
| KV-RC16BR | 16-point Screw Terminal Block, Relay Output, with Repeater Function |
| KV-RC16BT | 16-point Screw Terminal Block, Transistor Output, with Repeater Function |
| KV-RC16BX | 16-point Screw Terminal Block Input, with Repeater Function |
| KV-RC16BXT | 16-input + 16-output Screw Terminal Block, Transistor Output |
| KV-RC32BT | 32-point Screw Terminal Block, Transistor Output |
| KV-RC32BX | 32-point Screw Terminal Block Input |
| KV-RC8BXR | 8-input + 8-output Screw Terminal Block, Relay Output, with Repeater Function |
| KV-RC8BXT | 8-input + 8-output Screw Terminal Block, Transistor Output, with Repeater Function |
| Positioning/Motion unit | |
| KV-H20G | 2-axis Pulse Train (Linear and Circular Interpolation and Synchronous Operation Possible) with Built-in 2-channel High-speed Counter |
| KV-H20S | 2-axis Pulse Train (Linear Interpolation Possible) |
| KV-H40S | 4-axis Pulse Train (Linear Interpolation Possible) |
| KV-MC20V | 2-axis Pulse Train Positioning Motion Unit |
| KV-MC40V | 4-axis Pulse Train Positioning Motion Unit |
| KV-ML16V | 16-axis ML 2-compatible Positioning Motion Unit |
| KV-MX1 | INC Encoder, 4 Input Channels, 12 Inputs, 12 Outputs, SD Card |
| KV-SH04PL | High-Speed Positioning Unit |
| KV-XH04ML | 4-Axis Positioning/Motion Unit |
| KV-XH16ML | 16-Axis Positioning/Motion Unit |
| Highspeed counter unit | |
| KV-SC20V | 2-channel Multi-function High-speed Counter Unit |
| KV-SSC02 | High speed counter unit |
| Information/Network unit | |
| KV-CL20 | Master/Local Unit |
| KV-DN20 | DeviceNet® Unit |
| KV-EP21V | EtherNet/IP® Unit |
| KV-FL20V | FL-net Unit |
| KV-L20V | Serial Communication Unit |
| KV-L21V | Serial Communication Unit |
| KV-LE20V | Ethernet Unit |
| KV-LE21V | Ethernet Unit |
| KV-LH20V | Communication Positioning Unit |
| KV-LM20V | High-speed Multi-link (Megalink) Unit |
| KV-LM21V | High-speed multi-link Unit |
| KV-XL202 | Serial communication unit, 2 ports (RS-232C×2) |
| KV-XL402 | Serial communication unit, 2 ports (RS-422A/485×2) |
| KV-XLE02 | EtherNet unit, 2 ports |
| Power/Bus connection unit | |
| KV-7000C | Bus Connection Unit |
| KV-EB1 | Extension Unit |
| KV-N1 | Conversion unit with connector unit |
| KV-NC1 | Conversion unit with terminal block connector |
| KV-PU1 | AC Power Supply Unit with Error Output |
Thông tin bổ sung
| Thương hiệu | Keyence |
|---|---|
| Series | Keyence KV-5000/3000 |
