Keyence
PLC Keyence KV-5500
Mã sản phẩm: kv-5500
8.330.000 ₫
- Mã hàng: KV-5500
- Thương hiệu: Keyence
- Chất lượng: Mới 100%, chưa qua sử dụng
- Bảo hành: theo nhà sản xuất 12 tháng
- Chứng từ: hóa đơn VAT
- Khối CPU: Cài đặt Ethernet/IP tương thích, vào/ra 24 điểm
Cần tư vấn sản phẩm?Liên hệ Lạc Việt để được tư vấn thông số và báo giá phù hợp.Gọi tư vấn: 0961295263
Hàng chính hãngMới 100%
Bảo hành12 tháng
Hóa đơn VATCó
Thông tin sản phẩm
Nếu bạn đang tìm PLC Keyence, PLC Keyence KV-5500 là một lựa chọn đáng cân nhắc.
Thiết bị điều khiển lập trình dùng để xử lý logic và điều khiển máy móc, dây chuyền trong công nghiệp. Hàng mới 100%, chưa qua sử dụng, bảo hành 12 tháng theo nhà sản xuất và kèm hóa đơn VAT. Bạn có thể xem đầy đủ thông số ở bảng kỹ thuật bên dưới.
Thông tin chung
| Mã model | KV-5500 |
|---|---|
| Mã model | CPU Unit |
Thông số kỹ thuật
| Power Voltage | 24 VDC (±10%) |
|---|---|
| Operating Ambient Temperature | 0 to 50 °C (no freezing)*1*2 |
| Relative Humidity | 10 to 95 % RH (no condensation)*1 |
| Storage Temperature | -20 to +70 °C*1 |
| Operating Environment | Best in an environment with minimal dust and corrosive gases |
| Altitude | Max. 2000 m |
| Noise Immunity | 1,500 Vp-p or more, pulse width 1 µs, 50 ns (based on noise simulator), Conforms to IEC standards (IEC61000-4-2/3/4/6) |
| Withstand Voltage | 1,500 VAC for 1 minute between power supply terminal and I/O terminal or external terminal and enclosure |
| Insulation Resistance | Over 50 MΩ (measured between power supply terminal and I/O terminal or external terminal and enclosure with a 500 V DC megohmmeter) |
| Overvoltage Category | II (When using KV-U7) |
| Pollution Degree | 2 |
| Intermittent Vibration (Shock Resistance) | Frequency 5 to 9 Hz, Half amplitude: 3.5 mm*3Frequency 9 to 150 Hz, Acceleration: 9.8 m/s2*3 |
| Continuous Vibration (Shock Resistance) | Frequency 5 to 9 Hz, Half amplitude: 1.75 mm*3Frequency 9 to 150 Hz, Acceleration: 4.9 m/s2*3 |
| Operation Control Method | Program storage method |
| I/O Control Method | Refresh method |
| Programming Language | Expanded Ladder, KV Script, Mnemonic |
| Number of Instructions | Basic instructions: 81 classes, 171 instructionsApplication instructions: 43 classes, 60 instructionsArithmetic operation instructions: 115 classes, 293 instructionsExpansion instructions: 96 classes, 142 instructionsTotal: 335 classes, 666 instructions |
| Instruction Execution Speed | Basic instructions: 10 ns minimumApplication instructions: 20 ns minimum |
| Program Capacity | Approx. 260k steps |
| Maximum Number of Installable Units | 16 units (48 units when expansion units are connected) |
| Maximum Number of I/O Points | Max. 3,096 points when expanded (KV-EB1S/KV-EB1R: when 2 units are expanded, using 64-point I/O units) |
| Input Relay R (Bit Devices) | Total 16,000 points 1 bit |
| Output Relay R (Bit Devices) | Total 16,000 points 1 bit |
| Internal Auxiliary Relay R (Bit Devices) | Total 16,000 points 1 bit |
| Link Relay B (Bit Devices) | Total 16,384 points 1 bit |
| Internal Auxiliary Relay MR (Bit Devices) | Total 16,000 points 1 bit |
| Latch Relay LR (Bit Devices) | Total 16,000 points 1 bit |
| Control Relay CR (Bit Devices) | 640 points 1 bit |
| Timer T (Word Devices) | 4,000 points 32 bit |
| Counter C (Word Devices) | 4,000 points 32 bit |
| Data Memory DM (Word Devices) | 65,535 points 16 bit |
| Extended Data Memory EM (Word Devices) | 65,535 points 16 bit |
| File Register FM (Word Devices) | 32,768 points × 4 memory banks 16 bit (Memory bank switching mode)131,072 points 16 bit (Rotating ZF mode) |
| Link Register W (Word Devices) | Total 16,384 points 16 bit |
| Temporary Data Memory TM (Word Devices) | 512 points 16 bit |
| High-Speed Counter CTH (Word Devices) | 2 points 32 bit |
| High-Speed Counter Comparator CTC (Word Devices) | 4 points 32-bit (uses 2 high-speed counter points) |
| Index Register Z (Word Devices) | 12 points 32 bit |
| Control Memory CM (Word Devices) | 6,000 points 16 bit |
| Positioning Pulse Output | 2 points (100 kHz max. output frequency) |
| CPU Unit I/O | Inputs: 16 points, Outputs: 8 points |
| Program Memory (Power Off Hold Function) | Flash memory rewritable 100,000 times |
| Devices (Power Off Hold Function) | Battery backup for 5 years (operating ambient temperature 25 °C, during power off hold mode)*4 |
| Self-Diagnosis Function | CPU error, RAM error, others |
| Internal Current Consumption | CPU unit: 320 mA or lessExpansion unit: KV-EB1S 15 mA or less, KV-EB1R 25 mA or less (Excluding drive current for input circuit) |
| Weight | CPU unit: Approx. 320 gTerminal block: Approx. 30 gStart block for KV-5500/5000/3000: Approx. 20 gExpansion unit: KV-EB1S Approx. 90 g, KV-EB1R Approx. 115 g |
Thông tin bổ sung
Catalog-plc-keyence-kv-5000
Lựa chọn PLC phù hợp với Module keyence
| SKU | Mô tả |
| CPU | |
| KV-X500 | CPU unit |
| KV-8000 | CPU unit |
| KV-7500 | CPU unit with built-in EtherNet/IP® port |
| KV-7300 | CPU unit with built-in serial port |
| KV-5500 | CPU unit with built-in EtherNet/IP® port |
| KV-5000 | CPU unit with built-in Ethernet port |
| KV-3000 | CPU unit with built-in serial port |
| KV-1000 | CPU unit with built-in serial port |
| KV-700 | CPU unit with built-in serial port |
| I/O unit | |
| KV-B16RA | 16-point Screw Terminal Block, Relay Output |
| KV-B16RC | 16-point Screw Terminal Block, Relay Output |
| KV-B16TA | 16-point Screw Terminal Block, Transistor (Sink) |
| KV-B16TC | 16-point Screw Terminal Block, Transistor (Sink) |
| KV-B16TCP | 16-point Screw Terminal Block, Transistor (Source) |
| KV-B16TD | 16-point Screw Terminal Block, MOSFET (Sink) with Overcurrent Protection |
| KV-B16XA | 16-point Screw Terminal Block |
| KV-B16XC | 16-point Screw Terminal Block |
| KV-B8RC | 8-point Screw Terminal Block, Relay Output (Independent Common) |
| KV-B8XTD | 8-point/8-point Screw Terminal Block, MOSFET (Sink), with Overcurrent Protection |
| KV-C16XTD | 16-point/16-point Connector MOSFET (Sink) with Overcurrent Protection |
| KV-C32TA | 32-point Connector Transistor (Sink) |
| KV-C32TC | 32-point Connector Transistor (Sink) |
| KV-C32TCP | 32-point Connector Transistor (Source) |
| KV-C32TD | 32-point Connector MOSFET (Sink) with Overcurrent Protection |
| KV-C32XA | 32-point Connector |
| KV-C32XC | 32-point Connector |
| KV-C32XTD | 32-point/32-point Connector MOSFET (Sink) with Overcurrent Protection |
| KV-C64TA | 64-point Connector Transistor (Sink) |
| KV-C64TC | 64-point Connector Transistor (Sink) |
| KV-C64TCP | 64-point Connector Transistor (Source) |
| KV-C64TD | 64-point Connector MOSFET (Sink) with Overcurrent Protection |
| KV-C64XA | 64-point Connector |
| KV-C64XB | 64-point Connector, with All Terminals Supporting 2-wire Sensors |
| KV-C64XC | 64-point Connector |
| KV-SIR32XT | High speed I/O unit |
| I/O unit/Remote I/O unit | |
| KV-N16ER | Expansion output unit, output 16 points, relay output, screw terminal block |
| KV-N16ET | Expansion output unit 16 Outputs Transistor (Sink) Output Screw Terminal Block, |
| KV-N16ETP | Expansion output unit 16-output Transistor (source) output Screw terminal block |
| KV-N16EX | Expansion unit, Input, 16 points, 5/24 VDC switchable, screw terminal block |
| KV-N8ER | Expansion output unit, output 8 points, relay output, screw terminal block |
| KV-N8ET | Expansion output unit 8 Outputs Transistor (Sink) Output Screw Terminal Block, |
| KV-N8ETP | Expansion output unit 8-output Transistor (source) output Screw terminal block |
| KV-N8EX | Expansion Input Unit DC Input 8 Points Type Screw Terminal Block |
| KV-N8EXR | Expansion I/O Unit 16 Points Type Screw Terminal Block, Input(8 Points) relay output(8 Points) |
| KV-N8EXT | Expansion I/O Unit Screw Terminal Block, Screw Terminal Block, Input(8 Points) Transistor (sink)(8 Points) |
| KV-NC16ET | Expansion Output Unit 16-output Transistor (Sink) connector type |
| KV-NC16ETE | Expansion output unit 16 outputs transistor (sink) output European terminal block |
| KV-NC16ETP | Expansion output unit 16-output Transistor (source) output Connector type |
| KV-NC16ETPE | Expansion output unit 16 outputs transistor (source) output European terminal block |
| KV-NC16EX | Expansion Input Unit 16-input switching 5V/24V DC connector type |
| KV-NC16EXE | Expansion input unit input 16 points European terminal block |
| KV-NC16EXT | Expansion I/O unit 32-point connector type 16-input, 16-output (transistor) |
| KV-NC32ET | Expansion Output Unit 32-output Transistor (Sink) connector type |
| KV-NC32ETP | Expansion output unit 32-output Transistor (source) output Connector type |
| KV-NC32EX | Expansion Input Unit 32-input switching 5V/24V DC connector type |
| KV-NC32EXT | Expansion I/O unit 32-input 32-output Transistor (sink) output Connector type |
| KV-NC8ER | Expansion Output Unit 8-output Relay connector type |
| Analog/Temperature unit | |
| KV-AD40 | A/D Conversion Unit, 4 Analog Input Channels |
| KV-AD40G | High-precision A/D Conversion Unit, 4 Analog Input Channels |
| KV-AD40V | A/D Conversion Unit, 4 Analog Input Channels |
| KV-AM40V | A/D D/A Conversion Unit, 2 Analog Input Channels + 2 Analog Output Channels |
| KV-DA40 | D/A Conversion Unit, 4 Analog Output Channels |
| KV-DA40V | D/A Conversion Unit, 4 Analog Output Channels |
| KV-SAD04 | High-speed analogue input unit |
| KV-SDA04 | High-speed analogue output unit |
| KV-TF40 | PID Temperature Adjustment Unit (Multi-input 4-channel) |
| KV-TP40 | Temperature Analog Multi-input Unit (Multi-input 4-channel) |
| Analog/Temperature unit/Remote I/O unit | |
| KV-N3AM | Analog I/O Unit, voltage and current Input 2ch, voltage and current Output 1ch |
| KV-NC2DA | D/A conversion unit (2 points) |
| KV-NC4AD | A/D Conversion Unit 4-point type |
| KV-NC4TP | Temperature 4-input unit |
| Remote I/O unit | |
| KL-16BR | 16-point Screw Terminal Block, Relay Output |
| KL-16BT | 16-point Screw Terminal Block, Transistor (Sink) |
| KL-16BX | 16-point Screw Terminal Block |
| KL-16CT | 16-point Connector Transistor (Sink) |
| KL-16CX | 16-point Connector |
| KL-2DA | D/A Conversion Unit, 2 Analog Output Channels |
| KL-2TF | PID Temperature Adjustment Unit (2-channel) |
| KL-32CT | 32-point Connector Transistor (Sink) |
| KL-32CX | 32-point Connector |
| KL-4AD | A/D Conversion Unit, 4 Analog Input Channels |
| KL-8BLR | 8-point Screw Terminal Block, Relay Output with Repeater Function |
| KL-8BLT | 8-point Screw Terminal Block, Transistor (Sink) Output, with Repeater Function |
| KL-8BLX | 8-point Screw Terminal Block with Repeater Function |
| KL-8BXR | 8 Input + 8 Relay Output Screw Terminal Block |
| KL-8BXT | 8 Input + 8 Transistor (Sink) Output Screw Terminal Block |
| KL-B1 | Joint Cable Adapter |
| KL-DC1A | DC Current Input Unit |
| KL-DC1V | DC Voltage Input Unit |
| KL-LC1 | Load Cell Measurement Unit |
| KL-N20V | KL Master Unit |
| KL-T1 | T-shaped Branch Unit |
| KL-WH1 | Power Measurement Unit |
| KV-EP02 | EtherNet/IP® Compatible Communication Unit |
| KV-RC16BR | 16-point Screw Terminal Block, Relay Output, with Repeater Function |
| KV-RC16BT | 16-point Screw Terminal Block, Transistor Output, with Repeater Function |
| KV-RC16BX | 16-point Screw Terminal Block Input, with Repeater Function |
| KV-RC16BXT | 16-input + 16-output Screw Terminal Block, Transistor Output |
| KV-RC32BT | 32-point Screw Terminal Block, Transistor Output |
| KV-RC32BX | 32-point Screw Terminal Block Input |
| KV-RC8BXR | 8-input + 8-output Screw Terminal Block, Relay Output, with Repeater Function |
| KV-RC8BXT | 8-input + 8-output Screw Terminal Block, Transistor Output, with Repeater Function |
| Positioning/Motion unit | |
| KV-H20G | 2-axis Pulse Train (Linear and Circular Interpolation and Synchronous Operation Possible) with Built-in 2-channel High-speed Counter |
| KV-H20S | 2-axis Pulse Train (Linear Interpolation Possible) |
| KV-H40S | 4-axis Pulse Train (Linear Interpolation Possible) |
| KV-MC20V | 2-axis Pulse Train Positioning Motion Unit |
| KV-MC40V | 4-axis Pulse Train Positioning Motion Unit |
| KV-ML16V | 16-axis ML 2-compatible Positioning Motion Unit |
| KV-MX1 | INC Encoder, 4 Input Channels, 12 Inputs, 12 Outputs, SD Card |
| KV-SH04PL | High-Speed Positioning Unit |
| KV-XH04ML | 4-Axis Positioning/Motion Unit |
| KV-XH16ML | 16-Axis Positioning/Motion Unit |
| Highspeed counter unit | |
| KV-SC20V | 2-channel Multi-function High-speed Counter Unit |
| KV-SSC02 | High speed counter unit |
| Information/Network unit | |
| KV-CL20 | Master/Local Unit |
| KV-DN20 | DeviceNet® Unit |
| KV-EP21V | EtherNet/IP® Unit |
| KV-FL20V | FL-net Unit |
| KV-L20V | Serial Communication Unit |
| KV-L21V | Serial Communication Unit |
| KV-LE20V | Ethernet Unit |
| KV-LE21V | Ethernet Unit |
| KV-LH20V | Communication Positioning Unit |
| KV-LM20V | High-speed Multi-link (Megalink) Unit |
| KV-LM21V | High-speed multi-link Unit |
| KV-XL202 | Serial communication unit, 2 ports (RS-232C×2) |
| KV-XL402 | Serial communication unit, 2 ports (RS-422A/485×2) |
| KV-XLE02 | EtherNet unit, 2 ports |
| Power/Bus connection unit | |
| KV-7000C | Bus Connection Unit |
| KV-EB1 | Extension Unit |
| KV-N1 | Conversion unit with connector unit |
| KV-NC1 | Conversion unit with terminal block connector |
| KV-PU1 | AC Power Supply Unit with Error Output |
Thông tin bổ sung
| Thương hiệu | Keyence |
|---|---|
| Series | Keyence KV-5000/3000 |
