Keyence
PLC Keyence KV-7500
Mã sản phẩm: KV-7500
10.917.000 ₫
- Mã hàng: KV-7500
- Thương hiệu: Keyence
- Chất lượng: Mới 100%, chưa qua sử dụng
- Bảo hành: theo nhà sản xuất 12 tháng
- Chứng từ: CO/CQ, hóa đơn VAT
CPU unit with built-in EtherNet/IP™ port
Cần tư vấn sản phẩm?Liên hệ Lạc Việt để được tư vấn thông số và báo giá phù hợp.Gọi tư vấn: 0961295263
Hàng chính hãngMới 100%
Bảo hành12 tháng
Hóa đơn VATCó
Thông tin sản phẩm
PLC Keyence KV-7500 nằm trong nhóm PLC của Keyence.
Thiết bị điều khiển lập trình dùng để xử lý logic và điều khiển máy móc, dây chuyền trong công nghiệp. Hàng mới 100%, chưa qua sử dụng, bảo hành 12 tháng theo nhà sản xuất và kèm CO/CQ, hóa đơn VAT. Bạn có thể xem đầy đủ thông số ở bảng kỹ thuật bên dưới.
Thông tin chung
| Mã model | KV-7500 |
|---|---|
| Mã model | CPU unit |
Thông số kỹ thuật
| Power voltage | KV-5000/3000 Series System configuration using an expansion unit: 24 VDC (±10 %)KV-7000 Series System configuration with only an expansion unit: 24 VDC (-15 %/+20 %) |
|---|---|
| Operating ambient temperature | KV-5000/3000 Series System configuration using an expansion unit: 0 to +50 °C (No freezing)KV-7000 Series System configuration with only an expansion unit: 0 to +55 °C (No freezing) |
| Operating ambient humidity | KV-5000/3000 Series System configuration using an expansion unit: 10 to 95 % RH (No condensation)KV-7000 Series System configuration with only an expansion unit: 5 to 95 % RH (No condensation) |
| Ambient temperature for storage | KV-5000/3000 Series System configuration using an expansion unit: -20 to +70 °C KV-7000 Series System configuration with only an expansion unit: -25 to +75 °C |
| Storage relative humidity | KV-5000/3000 Series System configuration using an expansion unit: 10 to 95 % RH (No condensation) KV-7000 Series System configuration with only an expansion unit: 5 to 95 % RH (No condensation) |
| Operating environment | No dust or corrosive gas |
| Altitude | 2,000 m or less |
| Noise immunity | 1,500 Vp-p or more, Pulse width: 1 µs, 50 ns (based on noise simulator), IEC standard-compliant (IEC 61000-4-2/3/4/6) |
| Withstand voltage | 1,500 VAC for 1 minute (between the power terminals and the I/O terminals, and between the external terminals and the housing) |
| Insulation resistance | 50 MΩ or more (between the power terminals and the I/O terminals, and between the external terminals and the housing, with 500 VDC megohmmeter) |
| Shock resistance | Acceleration: 150 m/s², Operation time: 11 ms, 2 times in each of the X, Y, and Z directions |
| Pollution degree | 2 |
| Vibration resistance (Intermittent vibration) | Frequency 5 to 9 Hz, Half amplitude: 3.5 mm |
| Vibration resistance (Continuous vibration) | Frequency 5 to 11 Hz, Half amplitude: 1.75 mm |
| Arithmetic control mode | Stored program mode |
| I/O control mode | Refresh mode |
| Program language | Expanded ladder, KV Script, mnemonic |
| Number of commands | Basic instruction: 80 classes, 181 instructions. Applied instruction: 50 classes, 67 instructions. Arithmetic operation instruction: 125 classes, 318 instructions. Extended instruction: 76 classes, 131 instructions. Total: 331 classes, 697 instructions. |
| Instruction execution speed | Basic instruction: Min. 0.96 ns. Applied instruction: Min. 5.75 ns. Double precision floating-point instruction: Min. 58 ns. |
| CPU memory capacity | 64 MB |
| Program capacity | Approx. 1,500k steps |
| Maximum number of units to be installed | 16 units (only with KV-7000 Series expansion unit), 48 units (with KV-7000 Series expansion unit, KV-5000/3000 Series expansion unit (with extension unit (KV-EB1))) |
| Maximum number of I/O points | Maximum 3,072 points for expansion (KV-EB1S/KV-EB1R: 2 units used, 64-point unit used) |
| Bit device (Input relay R) | Total 16,000 points 1 bit |
| Bit device (Output relay R) | Total 16,000 points 1 bit |
| Bit device (Internal auxiliary relay R) | Total 16,000 points 1 bit |
| Bit device (Link relay B) | 32,768 points 1 bit |
| Word device (Timer T) | 4,000 points 32 bits |
| Word device (Counter C) | 4,000 points 32 bits |
| Word device (Data memory DM) | 65,535 points 16 bits |
| File register (Current bank FM) | 524,288 points 16 bits |
| File register (Dial mode ZF) | 524,288 points 16 bits |
| Link register W | 32,768 points 16 bits |
| Temporary data memory TM | 512 points 16 bits |
| Index register Z | 12 points 32 bits |
| Control memory CM | 6,000 points 16 bits |
| Device comment | Approx. 224,000 |
| Label | Approx. 285,000 |
| Program memory (Power failure hold function) | Flash ROM can be written 10,000 times |
| Device (Power failure hold function) | Nonvolatile RAM |
| Calendar timer (Power failure hold function) | Backup condenser lasts approx. 15 days (25 °C) (Approx. 5 years with KV-B1 (battery) (25 °C)) |
| Self-diagnosis function | CPU error, RAM error, other |
| Internal current consumption | 200 mA or less |
| Weight | CPU unit: Approx. 270 g, Bus-connected unit: Approx. 130 g, KV-B1 (battery): Approx. 10 g |
Thông tin bổ sung
Catalog-plc-keyence-kv-7000
Lựa chọn PLC phù hợp với Module keyence
| SKU | Mô tả |
| CPU | |
| KV-X500 | CPU unit |
| KV-8000 | CPU unit |
| KV-7500 | CPU unit with built-in EtherNet/IP® port |
| KV-7300 | CPU unit with built-in serial port |
| KV-5500 | CPU unit with built-in EtherNet/IP® port |
| KV-5000 | CPU unit with built-in Ethernet port |
| KV-3000 | CPU unit with built-in serial port |
| KV-1000 | CPU unit with built-in serial port |
| KV-700 | CPU unit with built-in serial port |
| I/O unit | |
| KV-B16RA | 16-point Screw Terminal Block, Relay Output |
| KV-B16RC | 16-point Screw Terminal Block, Relay Output |
| KV-B16TA | 16-point Screw Terminal Block, Transistor (Sink) |
| KV-B16TC | 16-point Screw Terminal Block, Transistor (Sink) |
| KV-B16TCP | 16-point Screw Terminal Block, Transistor (Source) |
| KV-B16TD | 16-point Screw Terminal Block, MOSFET (Sink) with Overcurrent Protection |
| KV-B16XA | 16-point Screw Terminal Block |
| KV-B16XC | 16-point Screw Terminal Block |
| KV-B8RC | 8-point Screw Terminal Block, Relay Output (Independent Common) |
| KV-B8XTD | 8-point/8-point Screw Terminal Block, MOSFET (Sink), with Overcurrent Protection |
| KV-C16XTD | 16-point/16-point Connector MOSFET (Sink) with Overcurrent Protection |
| KV-C32TA | 32-point Connector Transistor (Sink) |
| KV-C32TC | 32-point Connector Transistor (Sink) |
| KV-C32TCP | 32-point Connector Transistor (Source) |
| KV-C32TD | 32-point Connector MOSFET (Sink) with Overcurrent Protection |
| KV-C32XA | 32-point Connector |
| KV-C32XC | 32-point Connector |
| KV-C32XTD | 32-point/32-point Connector MOSFET (Sink) with Overcurrent Protection |
| KV-C64TA | 64-point Connector Transistor (Sink) |
| KV-C64TC | 64-point Connector Transistor (Sink) |
| KV-C64TCP | 64-point Connector Transistor (Source) |
| KV-C64TD | 64-point Connector MOSFET (Sink) with Overcurrent Protection |
| KV-C64XA | 64-point Connector |
| KV-C64XB | 64-point Connector, with All Terminals Supporting 2-wire Sensors |
| KV-C64XC | 64-point Connector |
| KV-SIR32XT | High speed I/O unit |
| I/O unit/Remote I/O unit | |
| KV-N16ER | Expansion output unit, output 16 points, relay output, screw terminal block |
| KV-N16ET | Expansion output unit 16 Outputs Transistor (Sink) Output Screw Terminal Block, |
| KV-N16ETP | Expansion output unit 16-output Transistor (source) output Screw terminal block |
| KV-N16EX | Expansion unit, Input, 16 points, 5/24 VDC switchable, screw terminal block |
| KV-N8ER | Expansion output unit, output 8 points, relay output, screw terminal block |
| KV-N8ET | Expansion output unit 8 Outputs Transistor (Sink) Output Screw Terminal Block, |
| KV-N8ETP | Expansion output unit 8-output Transistor (source) output Screw terminal block |
| KV-N8EX | Expansion Input Unit DC Input 8 Points Type Screw Terminal Block |
| KV-N8EXR | Expansion I/O Unit 16 Points Type Screw Terminal Block, Input(8 Points) relay output(8 Points) |
| KV-N8EXT | Expansion I/O Unit Screw Terminal Block, Screw Terminal Block, Input(8 Points) Transistor (sink)(8 Points) |
| KV-NC16ET | Expansion Output Unit 16-output Transistor (Sink) connector type |
| KV-NC16ETE | Expansion output unit 16 outputs transistor (sink) output European terminal block |
| KV-NC16ETP | Expansion output unit 16-output Transistor (source) output Connector type |
| KV-NC16ETPE | Expansion output unit 16 outputs transistor (source) output European terminal block |
| KV-NC16EX | Expansion Input Unit 16-input switching 5V/24V DC connector type |
| KV-NC16EXE | Expansion input unit input 16 points European terminal block |
| KV-NC16EXT | Expansion I/O unit 32-point connector type 16-input, 16-output (transistor) |
| KV-NC32ET | Expansion Output Unit 32-output Transistor (Sink) connector type |
| KV-NC32ETP | Expansion output unit 32-output Transistor (source) output Connector type |
| KV-NC32EX | Expansion Input Unit 32-input switching 5V/24V DC connector type |
| KV-NC32EXT | Expansion I/O unit 32-input 32-output Transistor (sink) output Connector type |
| KV-NC8ER | Expansion Output Unit 8-output Relay connector type |
| Analog/Temperature unit | |
| KV-AD40 | A/D Conversion Unit, 4 Analog Input Channels |
| KV-AD40G | High-precision A/D Conversion Unit, 4 Analog Input Channels |
| KV-AD40V | A/D Conversion Unit, 4 Analog Input Channels |
| KV-AM40V | A/D D/A Conversion Unit, 2 Analog Input Channels + 2 Analog Output Channels |
| KV-DA40 | D/A Conversion Unit, 4 Analog Output Channels |
| KV-DA40V | D/A Conversion Unit, 4 Analog Output Channels |
| KV-SAD04 | High-speed analogue input unit |
| KV-SDA04 | High-speed analogue output unit |
| KV-TF40 | PID Temperature Adjustment Unit (Multi-input 4-channel) |
| KV-TP40 | Temperature Analog Multi-input Unit (Multi-input 4-channel) |
| Analog/Temperature unit/Remote I/O unit | |
| KV-N3AM | Analog I/O Unit, voltage and current Input 2ch, voltage and current Output 1ch |
| KV-NC2DA | D/A conversion unit (2 points) |
| KV-NC4AD | A/D Conversion Unit 4-point type |
| KV-NC4TP | Temperature 4-input unit |
| Remote I/O unit | |
| KL-16BR | 16-point Screw Terminal Block, Relay Output |
| KL-16BT | 16-point Screw Terminal Block, Transistor (Sink) |
| KL-16BX | 16-point Screw Terminal Block |
| KL-16CT | 16-point Connector Transistor (Sink) |
| KL-16CX | 16-point Connector |
| KL-2DA | D/A Conversion Unit, 2 Analog Output Channels |
| KL-2TF | PID Temperature Adjustment Unit (2-channel) |
| KL-32CT | 32-point Connector Transistor (Sink) |
| KL-32CX | 32-point Connector |
| KL-4AD | A/D Conversion Unit, 4 Analog Input Channels |
| KL-8BLR | 8-point Screw Terminal Block, Relay Output with Repeater Function |
| KL-8BLT | 8-point Screw Terminal Block, Transistor (Sink) Output, with Repeater Function |
| KL-8BLX | 8-point Screw Terminal Block with Repeater Function |
| KL-8BXR | 8 Input + 8 Relay Output Screw Terminal Block |
| KL-8BXT | 8 Input + 8 Transistor (Sink) Output Screw Terminal Block |
| KL-B1 | Joint Cable Adapter |
| KL-DC1A | DC Current Input Unit |
| KL-DC1V | DC Voltage Input Unit |
| KL-LC1 | Load Cell Measurement Unit |
| KL-N20V | KL Master Unit |
| KL-T1 | T-shaped Branch Unit |
| KL-WH1 | Power Measurement Unit |
| KV-EP02 | EtherNet/IP® Compatible Communication Unit |
| KV-RC16BR | 16-point Screw Terminal Block, Relay Output, with Repeater Function |
| KV-RC16BT | 16-point Screw Terminal Block, Transistor Output, with Repeater Function |
| KV-RC16BX | 16-point Screw Terminal Block Input, with Repeater Function |
| KV-RC16BXT | 16-input + 16-output Screw Terminal Block, Transistor Output |
| KV-RC32BT | 32-point Screw Terminal Block, Transistor Output |
| KV-RC32BX | 32-point Screw Terminal Block Input |
| KV-RC8BXR | 8-input + 8-output Screw Terminal Block, Relay Output, with Repeater Function |
| KV-RC8BXT | 8-input + 8-output Screw Terminal Block, Transistor Output, with Repeater Function |
| Positioning/Motion unit | |
| KV-H20G | 2-axis Pulse Train (Linear and Circular Interpolation and Synchronous Operation Possible) with Built-in 2-channel High-speed Counter |
| KV-H20S | 2-axis Pulse Train (Linear Interpolation Possible) |
| KV-H40S | 4-axis Pulse Train (Linear Interpolation Possible) |
| KV-MC20V | 2-axis Pulse Train Positioning Motion Unit |
| KV-MC40V | 4-axis Pulse Train Positioning Motion Unit |
| KV-ML16V | 16-axis ML 2-compatible Positioning Motion Unit |
| KV-MX1 | INC Encoder, 4 Input Channels, 12 Inputs, 12 Outputs, SD Card |
| KV-SH04PL | High-Speed Positioning Unit |
| KV-XH04ML | 4-Axis Positioning/Motion Unit |
| KV-XH16ML | 16-Axis Positioning/Motion Unit |
| Highspeed counter unit | |
| KV-SC20V | 2-channel Multi-function High-speed Counter Unit |
| KV-SSC02 | High speed counter unit |
| Information/Network unit | |
| KV-CL20 | Master/Local Unit |
| KV-DN20 | DeviceNet® Unit |
| KV-EP21V | EtherNet/IP® Unit |
| KV-FL20V | FL-net Unit |
| KV-L20V | Serial Communication Unit |
| KV-L21V | Serial Communication Unit |
| KV-LE20V | Ethernet Unit |
| KV-LE21V | Ethernet Unit |
| KV-LH20V | Communication Positioning Unit |
| KV-LM20V | High-speed Multi-link (Megalink) Unit |
| KV-LM21V | High-speed multi-link Unit |
| KV-XL202 | Serial communication unit, 2 ports (RS-232C×2) |
| KV-XL402 | Serial communication unit, 2 ports (RS-422A/485×2) |
| KV-XLE02 | EtherNet unit, 2 ports |
| Power/Bus connection unit | |
| KV-7000C | Bus Connection Unit |
| KV-EB1 | Extension Unit |
| KV-N1 | Conversion unit with connector unit |
| KV-NC1 | Conversion unit with terminal block connector |
| KV-PU1 | AC Power Supply Unit with Error Output |
Thông tin bổ sung
| Thương hiệu | Keyence |
|---|---|
| Series | Keyence KV7000 |
